Quality control

Quality control

We have always upholded “The quality is our life”for business goals.Since our company established quality control is the most attention to our production process.And we always keep the high rate of the good products.

At the same time,our company enjoys a high reputation in the northeastern of China.Our quality management system also has been recognized by our many customers who has been visited to our company.

Organization Structure

Our QC team is made up of seven persons and two of them have worked on quality control in Japan.The most experienced member have worked on this job for 10 years.The other members have 3 years experience at least.

Quality Checker

Position

Senior Technician

Staff

Shukui Pan

Skill Level

□CMM □Tool Microscope □Roughness Measurement □Hardness Tester □Digital Caliper □Inside Microscope □Submit Inspection □Test Report Issued By Authority

QC Engineer Profile

QC Engineer Profile
Name Shugui Pan Qianli Ma Xingyang Zhao Fan Xu Yubo Zhao Hongning Shi Mingzhuo Yu
Photo
Position Monitor of quality Engineer of quality Engineer of quality Engineer of quality Quality inspector Quality inspector Quality inspector
T
E
S
T
I
N
G

O
P
E
R
A
T
I
O
N

I
T
E
M
CMM
     
Tool microscope
 
Joint arm coordinate measuring machine
     
Automatic height gauge
Hardness tester
Roughness measuring machine
Manual height gauge
Concentricity tester
Hand-held hardness tester
Digital caliper
Orifice calipers
Caliper depth rule
Digimatic micrometer
Inner hole caliper
Holtest
Go/no go gage
Thread ring gage
Dial gauge
Gauge block
Feeler gauge
Pin Gage
Inside groove calipers
Gear tooth micrometer
Blade micrometer
Caliper gauge
Inside calipers
Inner diameter gauge
Test tool calibration
Authoritative test report issued
   
First confirm all products to be detected and the consistency of drawings.
Second confirm whether product surface adhesion drawing cosmetic requirements.
Third test all the dimensions of the drawing and wire test data on the detection of drawings.
Detect the defective product,the inappropriate content must be written in the list of the “bad repair record sheet”,and on the drawings and products are identified.
Products such as surface treatment,the product must be in the surface treatment area,and make a logo.
write to us
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
MOBILE WEB
Contact us

Hongsheng provides customers with high quality, professional machining services, welcome to contact us at any time!

subscription
Contact Person
Tel:

86-411-87552333-828

Email:
Address:
19-2, Liaoning Street, Jinpu New District, Dalian City, Liaoning Province, China.